|
|
'
70 - ' 72 Monte Carlo Fenders
Konik's Klassiks has a growing selection of NOS
and reconditioned fenders. All of our reconditioned fenders go
thru the same process to make them ready for
installation and final blocking at your painter:
1. The fender is stripped to bare metal
and inspected for any collision damage or rust.
2. The edges of the fender are sandblasted to remove rust and
scale.
3. The large surface areas are stripped by hand to avoid
warping, usually caused by sandblasting.
4. Dents and dings are metal finished prior to filler work.
All rust damage is repaired at this time.
5. The fender brace is repaired or replaced as needed.
6. High quality glass and filler is applied and the fender is
rough blocked.
7. The fender is sealed using PPG DP-90.
8. The fender is again rough blocked, followed by 4 - 6 coats
of PPG K-36.
9. The fender is then color sanded using 180 grit.
10. Steps 7 - 9 are repeated as necessary to ensure straight,
smooth finish.
11. Packaging of fenders is done by
St. Clair
Packaging with double-wall insulated
packaging to prevent
damage during shipment.
See pictures below for our fender reconditioning process.
Price:
$800 each (Reconditioned)
$250 - $500 (Used, non-reconditioned)
$CALL (NOS, limited
availability)
Home | Fenders | Marker Lights | Doors | Hoods
This site was last updated
07/10/08
|
