|
|
'
70 - ' 72 Monte Carlo Hoods
Konik's Klassiks has a growing selection of used
and reconditioned hoods. All of our reconditioned hoods go
thru the same process to make them ready for
installation and final blocking at your painter:
1. The hood is stripped to bare metal
and inspected for any collision damage or rust.
2. The edges of the hood are sandblasted to remove rust and
scale.
3. The large surface areas are stripped by hand to avoid
warping, usually caused by sandblasting.
4. Dents and dings are metal finished prior to filler work.
All rust damage is repaired at this time.
5. High quality glass and filler is applied and the hood is
rough blocked.
6. The hood is sealed using PPG DP-90.
7. The hood is again rough blocked, followed by 4 - 6 coats
of PPG K-36.
8. The hood is then color sanded using 180 grit.
9. Steps 6 - 8 are repeated as necessary to ensure straight,
smooth finish.
10. Packaging of hoods is done by
St. Clair
Packaging with double-wall insulated
packaging and Styrofoam to
prevent damage during shipment.
See pictures below for our hood reconditioning process.
Price:
$600 each (Reconditioned)
$150 - $300 (Used, No Rust)
Home | Fenders | Marker Lights | Doors | Hoods
This site was last updated
07/10/08
|
